Home›Shops & Garages›Storage Buildings & Pole Barns

Storage Buildings
& Pole Barns

Post-frame pole barns, enclosed storage buildings, equipment and agricultural barns, lean-to additions, utility buildings, and enclosed boat and RV storage — built across the Cape Fear region and engineered for coastal wind.

Request Estimate — $250 Storage Cost Guide
Storage Types

Cover, Enclose,
or Condition

Three levels of protection at three very different price points. We will tell you which one your equipment actually needs.

🏗

Post-Frame Pole Barns

Laminated columns, clear spans, no interior posts, fast erection. The most economical way to cover a large footprint in southeastern NC — and easy to enclose or expand in phases later.

📦

Enclosed Storage Buildings

Fully sided and roofed, lockable, with roll-up or swing doors sized to what goes inside. Optional insulation and ventilation for tools, equipment, and anything that resents coastal humidity.

🚜

Equipment & Implement Storage

Tractors, mowers, trailers, attachments, and the machinery that keeps rusting in the weather. Sized around turning radius and door width, not just square footage.

🚤

Boat Storage Buildings

Enclosed protection from sun, salt air, and storm debris. Door height sized for the boat on its trailer with the T-top or tower up. Usually cheaper over five years than commercial dry storage.

🚒

RV & Motorhome Storage

14 to 16-foot walls with 12 to 14-foot doors, optional power, water, and dump-station rough-in. Bring the real rig dimensions, including the AC unit and antennas.

🐴

Horse & Livestock Barns

Stalls, run-in sheds, tack and feed rooms, hay storage, and the ventilation and drainage detailing that separates a real barn from a shed with stalls in it.

🌾

Agricultural & Farm Buildings

Hay, feed, and grain storage, equipment sheds, and general farm structures across Pender, Brunswick, Onslow, and New Hanover counties. We check the ag-use permitting path early.

⛺

Lean-To Additions

Covered space added along one or both long walls of an existing or new building. The cheapest square footage on the property — ideal for trailers, firewood, and staging.

🔧

Utility & Commercial Outbuildings

Contractor storage and staging, materials yards, and small commercial utility structures for business property across the Cape Fear region.

Why Post-Frame

The Most Building
per Dollar

Post-frame construction sets engineered laminated columns on footings and spans between them with girts and trusses. No continuous foundation wall, no interior posts, wide clear spans, quick erection. When you need to cover a lot of ground and you are not building conditioned living space, it is almost always the right call.

  • Lower cost per square foot, and the advantage grows with size
  • Wide clear spans — nothing in the middle of your floor
  • Fast build compared to conventional foundation and framing
  • Easy to expand with bays or lean-to additions
  • Phased finish — start open, enclose later, insulate after that
  • Flexible flooring — gravel, compacted stone, or a poured slab

The tradeoff: post-frame is harder to convert to finished, conditioned living space than stick-built or a slab-on-grade structure. If there is any chance you will want an apartment or office in that building someday, tell us now and we will spec it differently.

Talk Through Your Build
Sizing Guide

Common Storage Building Sizes

  • 12×20: lawn equipment, yard tools, general storage
  • 20×24: a vehicle plus equipment, or a small workshop area
  • 24×30: tractor, trailer, and implements with working room
  • 30×40: multiple pieces of equipment, hay or feed, covered work area
  • 40×60: small commercial or serious agricultural footprint
  • Tall bays: 14–16 ft walls for boats, RVs, and lifted equipment
  • Lean-to: 12–16 ft deep along either long wall

Measure what goes inside, then add room to walk around it and swing the doors. Everyone underestimates this.

Storage Pricing

What Storage Buildings Cost
in Cape Fear NC

General ranges for permitted, wind-engineered post-frame construction. Site prep and utilities separate.

Open Cover

Open-Sided Pole Barn

$12K–$30K
roof and columns, open walls
  • Post-frame columns on engineered footings
  • Metal roof, open or partially closed walls
  • Gravel or compacted stone floor
  • Equipment, hay, trailer, and vehicle cover
  • Permits included
Most Popular

Enclosed Storage Building

$25K–$60K
fully sided and lockable
  • Full metal or wood siding, sealed and lockable
  • Roll-up or sliding doors plus walk door
  • Concrete slab or gravel floor
  • Electrical and lighting available
  • Insulation and ventilation options
  • Coastal wind engineered, permits included
Request Estimate
Tall Storage

Boat & RV Storage

$30K–$80K
14–16 ft walls, tall doors
  • 12–14 ft overhead doors
  • Extended depth for trailer and tongue
  • Power, water, dump-station rough-in optional
  • Concrete slab recommended
  • Permits included

Ranges only, not quotes. Site clearing, grading, driveway access, and utility runs are priced separately. $250 estimate credited to your project at signing.

Common Questions

Storage Building & Pole Barn FAQ

Open-sided post-frame pole barns generally run $12,000–$30,000 depending on footprint and roof height. Fully enclosed storage buildings typically run $25,000–$60,000. Tall enclosed boat and RV storage with 12 to 14-foot doors runs $30,000–$80,000. Insulated and conditioned storage costs more. Cost per square foot drops significantly as the footprint grows, which is why post-frame is the standard answer when you need to cover a lot of ground economically.
Post-frame — what most people call pole barn construction — uses large laminated columns set on engineered footings, with horizontal girts and trusses spanning between them. Because the columns carry the load, you do not need a continuous foundation wall, you get wide clear spans with no interior posts, and the building goes up quickly. For storage, equipment cover, and agricultural use it is almost always the most economical dollar-per-square-foot path.
Yes, and post-frame is well suited to phased construction. Many owners start with an open-sided pole barn for cover, then enclose one or more walls, then insulate and condition a portion of it. The key is telling us up front so we set column spacing, footing sizes, roof pitch, and eave height to support what is coming. Retrofitting a building that was never designed for enclosure is where the money gets wasted.
Yes — horse barns, run-in sheds, hay and feed storage, implement and tractor storage, and general agricultural buildings across Pender, Brunswick, Onslow, and New Hanover counties. Agricultural structures sometimes fall under different permitting rules depending on the parcel and its use classification, which is one of the first things we check. Ventilation, drainage, and stall layout matter more in a barn than in a plain storage building.
Work backward from what goes inside plus the room to move it. A 12×20 handles lawn equipment and general yard storage. A 24×30 covers a tractor, a trailer, and implements. A 30×40 handles multiple pieces of equipment with working room. A 40×60 is a small commercial or serious agricultural footprint. For boats and RVs, height and door width matter more than square footage — measure the rig on its trailer with everything up.
Almost always. Size thresholds, setbacks, height limits, and impervious surface rules vary by jurisdiction, and some agricultural structures are handled differently. Even where a structure might be exempt from a building permit, zoning and stormwater review usually still apply. We check the rules for your specific parcel and handle the submittal, review, and inspections as part of scope.
Yes, and it is one of the most requested builds along the coast. Enclosed storage protects a boat or motorhome from sun, salt air, and storm debris, and it usually pays for itself against years of commercial storage fees. The critical specs are door height and width, interior clear height, and door swing or roll-up clearance. Bring us the actual dimensions of the rig on its trailer, not the brochure numbers.
Ours are engineered to the applicable coastal wind zone for your address, which affects column embedment and footing size, girt and purlin spacing, fastener schedules, truss connections, and door selection. Open-sided structures actually face specific uplift challenges that a fully enclosed building does not, so they need the right detailing rather than less of it. A cheap kit barn is the one you find in your neighbor's yard after a storm.

Stop Storing It Outside

Sun, salt air, and afternoon storms are expensive. A site visit and a written proposal cost $250, credited back at signing.

Request an Estimate 📞 910-632-0594